-40%
1 to 6 40A Connector Power Splitter Distributor Source Compatible with Powe PAN
$ 8.93
- Description
- Size Guide
Description
Product name: FB1901 long 6 independent positive and negative fuse box fuseProduct model: ZH-978A1
Net weight: 189G
Gross weight: 193G
Product size: 12*5*5.2cm
Single product package size: 18.5*13*5.5cm
Packing method: standard PE bag packing (carton can be discussed separately)
Input rated voltage: 32V
Input rated current: 75A
Maximum output current: 20A per circuit
Material: PA66 body, PC dust cover, nickel-plated copper terminal, stainless steel screw, PPĂ—70 sticker
M6 thread stud (75A, 32V DC Max)
Main conductor: #4-6AWG
Single wire terminal: M4 thread stud (20A, 32V DC Max)
Single wire: #12-16AWG
Accepts ATO or ATC fuses from 1A to 20A
Installation range: can be installed in cars, off-road vehicles, RV, buses, yachts, boats and other above the use
Scope of use: can be directly connected to the car/ship any electrical lines [such as: roof lights, car headlights, width lights, fog lights, warning lights, car refrigerator, car charger, car fans, car TV, etc.]
Accessories: Sticker X2; Self-tapping screw X4; 20A safety piece X4; 15A safety tablets X2; 10A safety piece X2; 5A safety tablets X4
Fuse function: when the circuit failure or abnormality, with the rising current, and the rising current may damage some important devices or valuable devices in the circuit, it is possible to burn the circuit or even cause fire. The fuse protects the electronic equipment from being damaged by the current and also avoids serious damage caused by the internal fault of the electronic equipment. Therefore, each fuse has a rated size and will blow if the current exceeds the rated size. If the fuse is placed correctly in the circuit, then the fuse will fuse itself to cut off the current when the current rises abnormally to a certain height and a certain temperature, thus playing the role of protecting the safe operation of the circuit
Product advantages: [1] products using PA66 anti-flame resistance, high and low temperature environmental protection material, fully meet the conditions of [fuse seat must have good mechanical strength, insulation, heat resistance and flame retardancy, in use should not produce fracture, deformation, combustion and short circuit phenomenon]
[2] All the fasteners are made of stainless steel. The input and output ends of the fuse box are fixed by tightening screws, which can be installed more quickly. Moreover, self-tapping screws are adopted for the fixation of the fuse box, making the installation simpler and safer.
[3] The products are presented with stickers, which can be pasted on the electrical appliances we connect according to the name on the stickers. When the fuse is broken, we can identify which electrical appliances have the problem in the first time, saving time and effort
[4] Double fuses are distributed in the product. When applied, the fuses are burned and can be replaced immediately from the spare fuses. And the fuses are sent to multiple Abe's
On Jul-06-21 at 08:54:07 PDT, seller added the following information: