220V 3000ml Magnetic Stirring Heating Mantle Temperature Set & Digtal Display

Description

220v 0.66Gal Stirring digital display thermostatic heating sleeve
Please make sure all the fittings are installed, to determine the  liquid inside the flask, then heat. And make sure the temperature is  below 380℃.(This item doesn't include the flask)
I. Introduction
Designing by European techniques, with its advance technology, stable  performance, novel structure and good using effect, this equipment is  widely used for in heating in labs of colleges, petrochemical  industries, medicine, and environment protection institutions etc.
Ⅱ. Characteristics
1.
Cold  rolling sheet stretching and spraying exterior.
2.
Use  advanced digital temperature control system can precisely control the  temperature of the heated liquid, easy to use, high precision,  temperature display intuitive.
3.
Using  high quality nickel-chrome heating resistance wire sealed in high  temperature insulation layer. Woven into half the ball in heating sets,  with characteristics of large heating area, fast warm-up, high  temperature evenness, no open flame and so on.
Ⅲ. Working condition
Ambient temperature: 5~40℃;
Ambient humidity:
≤
90%;
Voltage:
22
0
V
Ⅳ.Main technical parameters
Model
98-II-C
Capacity (ml)
50
100
250
500
1000
2000
3000
5000
Voltage(v)
22
0V
Max. use tem.
380
℃
Tem. Range
Ambient tem.～40℃
Sensor
PT100
Working mode
continuous
Power(W)
80
100
150
250
350
450
600
800
(Red color is  available)
Ⅴ. Operation instruction
a)
Place  the equipment on level worktable
,  put the sensor frame, and plug it into sensor block on the back of the  instruments
b)
Fill  a liquid container in the instrument, and set the sensor in the heated  liquid.
c)
Use  the same voltage as the machine required, and then the instrument’s  screen will display the temperature of the liquid.
d)
Set  temperature: after press “S” ,the green button “Set” indicator light,  the screen display the set temperature, and press the arrow keys to  select the temperature you want to use. After setting temperature, press  “S” to display the actual temperature.
e)
When  heated the red indicator light, lights off when not heated.
f)
When  temperature rose to the set temperature at the first time, it may be  washed for few degrees; it will stabilize down when the temperature came  down.
g)
Stirring  adjust: Adjust the stirring speed by turn the knob clockwise.
Ⅵ. Safety attentions
Connect the device to an earthed power supply to ensure safety  of machine and experiment; connect the power as the machine  required.
This  equipment is forbid to use in inflammable and explosive,  poisonous and strong corrosive experiments.
Make  sure horizontal installation.
Non-professionals  are not allowed to disassemble and repair this machine.
Pay attention to the set temperature while dealing with the  inflammable matters.
Make  sure dry the resin container, if the temperature is setting too  high by accident, the container would be dissolved and then fall  on the heater to cause fire.
Overfilled  of sample will lead to overheat of working room under parts,  which will dissolve the inflammable  material and cause fire.
While  the machine is working, don’t touch the top, window and exhaust  port of the device to protect from high-temperature burns.pan>
Read  the instruction book before operation.
Ⅶ. Usage notes
1.
Because  of the surface of heat insulation material is coated with grease, in the  first used shall first heat except when heating oil, will appear white  smoke, shut off the power  after heating to smokeless, when the  temperature come down, it can normal use
2.
When  use the instrument should pour the liquid into the container firstly,  and then put in the instrument to use.
Ⅷ. Fault analysis
Phenomenon
Causation
Treatment
No power
Poor connect of
socket
and
plug
circuit  not
closes.
Adjust the socket
and  plug
Adjust  the circuit
No heating
Heating jacket wire is broke
Chang
heating
jacket
No
temperature
control
The control panel is broke
Change
control  panel
Ⅸ. Storage and transportation
Keep it in dry and clean room with good ventilation and no corrosive  gas, prevent it from wetting by the rain and avoid violent collision in  transportation.
Item#
Description
QTY
Unit
020216
220vStirring digital display  thermostatic heating sleeve0.66gal
1
set
Shipping & Handling Details
Default  Shipping Cost or Free Shipping Information:
▲
Default  shipping cost or free shipping service is only for the customers  from Canada or the lower 48 United States by Canada Post, USPS or  the UPS Ground. Customers from other areas or needs other shipping  ways, please contact us.
▲
Buyers  from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska,  Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there  WILL be extra shipping costs, please contact us for more detailed  information.
▲
Please  make sure your address is valid for both UPS and USPS services. Any  costs incurred because of incorrect or undeliverable address should  be undertaken by buyer.
Handling Time:
Shipping  is usually made in 1-3 business days after payments cleared. Orders  are processed from Monday-Friday; Not on the weekends & public  holidays.
Sales tax / Customs  duties:
Any  sales taxes or Customs duties are not included. If came out, they  must be undertaken by the buyer.
Damage In Shipping:
Email  or call us First! We will work with you to get the case resolved in  the fastest method.
Return /  Refund
If you are not 100% happy with your purchase, please  contact Us. Please don't directly opened a request or case without  informing us, or else, we will do some discounts on the warranty and  other sales-services later on. Hope for your understanding.
Returns & Exchanges
▲
All  returns must be made within 14 days of delivery date. Items must be  in new, unused condition, with all original materials included with  the shipment. A partial refund may be applied for opened or damaged  items, depending on the condition.
▲
Items  returned under the buyer’s remorse: The return shipping fee must be  covered by the buyer; The original shipping cost will also be  deducted from the refund. 15% restocking fee of the items purchase  price will be charged.
▲
Returns  that are the result of our seller's error: Buyer will receive a full  refund of the item as well as shipping charges
▲
All  returns require a RA (Return Authorization) number that will be  given by our seller. Please contact with us at first for more  details.
Defective & Damaged Products
▲
If  product was received damaged or not as described, please send us  some pictures or videos, so we could well understand your problem,  then solve them for you ASAP. Besides, it's much helpful for us to  claim with UPS, remind our related department to pay much more  attention to packaging later on. Hope for your understanding.
▲
Replacement  or refund of defective or damaged products can only be returned in  exchange for the exact same product, or else, the purchase price  will be refunded back to your original payment method.
▲
If  an item is received damaged, customer service must be contacted  within 7 days of receiving your item. All returns require a RA  (Return Authorization) number as above.
Payment
eCheck Issues:
Payments via  eCheck do not clear immediately. Usually you will wait 5-7 days  after checkout for it to clear. Then we will arrange shipments  for you.
Warranty & Feedback
▲
6  months' warranty for the machines, not for the consumables. We stand  behind our products all the item, so even if your warranty period  has expired, you can still seek for service or technical support  from us with low cost.
▲
Any  warranty shipping cost to us is responsible by buyer.
▲
Any  shipping cost to buyer is responsible by the seller.
▲
We  committee to the customer satisfaction and want to bring you the  best purchase experience. If there is any problems, please contact  us ASAP. If not, please leave us a positive feedback as it's very  important for us. Thanks very much.